缝管原子捕集原子吸收光谱法测定维生素B12

本文研究了Ａｌ２Ｏ２涂层的开缝石英管原子捕集法测定ＣＯ的条件并通过测ＣＯ间接测定维生素Ｂ（１２）。结果表明，在优化条件下Ｃｏ的特征浓度为８×１０（－３）μｇ·ｍＬ（－１），比常规火焰原子吸收法的灵敏度提高８倍。采用本法测定腺苷辅酶维生素Ｂ（１２）中ＶＢ（１２）的含量，相对标准偏差１．１％，加标回收率９８．２～１００．４％。     

Solid Phase Extraction Chemiluminescence Determination of Methamidaphos on Vegetables

IntroductionDuring recent years,organophosphorus pesticides(OPPs)have been widely used in agriculture becauseof their low environmental persistence and high effec-tiveness.However,they have a high acute toxicity.Trace amounts of OPPs may remain in foodstu…     

Synthesis and Characterization of a Novel Organic/Inorganic Hybrid Based on Octamolybdates and Benzimidazole Molecules [Hbenzimi]4 [(benzimi)2Mo8O26] · 2H2O (benzimi?=?benzimidazole)

A novel organic/inorganic compound [Hbenzimi]₄[(benzimi)₂Mo₈O₂₆] · 2H₂O (1) has been prepared hydrothermally and characterized by elemental analyses, i.r., x.p.s., t.g. and single crystal X-ray diffraction. The single crystal X-ray diffraction analysis reveals that compound (1) consists of the [Mo₈O₂₆]⁴⁻ cluster as the structural motif covalently linked by benzimidazole molecules and protonated benzimidazole molecules as charge compensation cations. It is interesting that the benzimidazole molecules were synthesized from 1,2-phenylenediamine and oxalic acid. The [Mo₈O₂₆]⁴⁻ polyoxoanions and organic ligands in compound (1) interact with each other via extensive hydrogen bonds to form a three-dimensional supramolecular framework.     

分子印迹聚合物微球的制备及表征技术

分子印迹聚合物微球作为一种具有分子识别能力的新型高分子材料,以其吸附选择性好、色谱效率高、便于功能设计等优点在固相萃取、药物手性分离等领域取得了应用.本文介绍了分子印迹聚合物微球的主要制备方法,比较了不同的聚合物微球制备方法用于分子印迹技术中的特点,同时针对不同聚合方法对分子印迹聚合物微球性能的影响作了相应评述,此外对其结构与性能的表征方法也作了较为详细的介绍,在此基础上分析了存在的问题及今后的发展方向.     

Photodynamic therapy based on organic small molecular fluorescent dyes

This review aims to provide a summary of the progress in organic small molecular fluorescent dyes for photodynamic therapy in recent years and it is classified according to the structures of dyes including cyanines, phthalocyanine, BODIPYs and other agents.     

新型PES微孔材料的制备及性能研究

合成了新型双烯丙基聚醚砜(PES), 采用超临界CO2作为物理发泡试剂制备微孔材料, 研究了不同发泡温度、饱和压力、发泡时间和放气时间等因素对微孔形貌的影响. 结果表明, 发泡温度在110~170 ℃之间, 随着温度的升高, 泡孔直径增加, 泡孔密度在140 ℃达到一个最大值; 随着饱和压力的升高, 泡孔直径减小, 泡孔密度增大; 发泡时间和放气时间对微孔直径和密度影响不大; 研究了在不同辐照剂量下微孔材料的交联性能, 结果表明, 在600 kGy辐照剂量以下, 交联效果不明显, 在800 kGy以上, 随着辐照剂量的增大, 凝胶含量增加, 辐照后的样品在265 ℃热处理10 min, 仍能保持完好的微孔结构.     

5α,11-二羟基-2-氧代桉烷-3-烯的全合成

5α，11-二羟基-2-氧代桉烷-3-(5α-Hydroxy—isopterocarpolone，1)是由贾忠建等于1996年从中药南牡蒿中首次分离得到的一种桉烷型倍半萜类天然产物．桉烷型倍半萜类化合物广泛分布于天然植物中，具有较好的昆虫拒食、抑制细胞繁殖和植物生长调节等多种生理活性．天然产物1的合成研究尚未见报道．     

Resonance Rayleigh scattering determination of trace amounts of Al in natural waters and biological samples based on the formation of an Al(III)-morin-surfactant complex

A novel method for the determination of trace amounts of Al(III) based on resonance Rayleigh scattering (RRS) has been developed. In the presence of some surfactants, Al(III) can react with morin and form an Al(III)-morin-surfactant complex, which results in the enhancement of RRS intensity and the appearance of the corresponding RRS spectral characteristics. Their maximum scatter peaks are at 476 nm for the cetyltrimethylammonium bromide (CTAB) system, 489 nm for the cetylpyridinium chloride (CPC) system, 474 nm for the Triton X-100 system, and 473 nm for the Tween-20 system. The enhanced RRS intensity is directly proportional to the concentration of Al(III). The detection limits are in the range of (0.50-1.2)×10⁻⁷ mol l⁻¹ depending on the surfactant. The characteristics of RRS spectra of the complexes, the optimum conditions of these reactions and the influencing factors have been investigated. The method has high selectivity, and was successfully applied to the determination of Al(III) in natural and biological samples. Furthermore, according to different complexation capacity of Al(III)-morin-CTAB system under two pH conditions, speciation analysis of Al(III) in natural waters was explored. The labile monomeric Al fraction (mainly inorganic Al, Al_i) is determined at acidic pH and the total monomeric Al fraction (Al_a) is determined at alkaline pH. The results are in agreement with those obtained by Driscoll’s 8-hydroxyquinoline extraction-ion exchange method.     

Parallel iterative reaction path optimization in ab initio quantum mechanical/molecular mechanical modeling of enzyme reactions

The determination of reaction paths for enzyme systems remains a great challenge for current computational methods. In this paper we present an efficient method for the determination of minimum energy reaction paths with the ab initio quantum mechanical/molecular mechanical approach. Our method is based on an adaptation of the path optimization procedure by Ayala and Schlegel for small molecules in gas phase, the iterative quantum mechanical/molecular mechanical (QM/MM) optimization method developed earlier in our laboratory and the introduction of a new metric defining the distance between different structures in the configuration space. In this method we represent the reaction path by a discrete set of structures. For each structure we partition the atoms into a core set that usually includes the QM subsystem and an environment set that usually includes the MM subsystem. These two sets are optimized iteratively: the core set is optimized to approximate the reaction path while the environment set is optimized to the corresponding energy minimum. In the optimization of the core set of atoms for the reaction path, we introduce a new metric to define the distances between the points on the reaction path, which excludes the soft degrees of freedom from the environment set and includes extra weights on coordinates describing chemical changes. Because the reaction path is represented by discrete structures and the optimization for each can be performed individually with very limited coupling, our method can be executed in a natural and efficient parallelization, with each processor handling one of the structures. We demonstrate the applicability and efficiency of our method by testing it on two systems previously studied by our group, triosephosphate isomerase and 4-oxalocrotonate tautomerase. In both cases the minimum energy paths for both enzymes agree with the previously reported paths.     

Ni(II)-糖胺金属配合物的合成、晶体结构及催化PNPP水解的活性研究

根据文献方法合成了金属配合物[Ni(HL)]Cl₂•2H₂O (HL＝1-[(2-氨乙基)氨基]-2-氨基-1,2-二脱氧-D-葡萄糖), 并用重结晶方法得到了适于X射线衍射的Ni(II)配合物的单晶. 通过对其进行元素分析、红外、紫外光谱及X射线衍射分析, 表明其为畸变的八面体构型. 最后研究了配合物对对硝基苯吡啶甲酸酯(PNPP)催化水解活性.